English

- Ferrosilicon 45 (FS-45), 65 (FS0-65) GOST 1415-78 (DSTU 4127:2002)

- Ferrosilicomanganese (silicon manganese) MnS17, FeMnSi12, FeMnSi18

- Silicon metal

Silicon metal grade 441 - Chemical analysis:

Si - 99%

Fe – 0,40%

Al – 0,4%

Ca – 0,1%

Packing – big bags of about 1 mt

Size – 10-100 mm

Silicon metal grade 553 - Chemical analysis:

Si - 98,5 %

Fe – 0,5 %

Al – 0,5%

Ca – 0,3%

Packing – big bags of about 1 mt

Size – 10-100 mm

- Secondary aluminum foundry alloys

Secondary aluminum foundry alloys (Alluminium Alloys and ingots) in the form of ingots AV87, AV91, AK5M2, AK9M2, AK12, AK7, AK7ch, AK7p, AK7pch, AK5M7, AK8M3, AK12M2MgN, DIN-1725 226D - AlSi9Cu3 (Fe) according to EN AC 46000, AlSi9Cu2 (Fe), 230D - AlSi12 (Fe) according to EN AC 44300, 231D - AlSi12Cu1 (Fe) according to EN AC 47100, AlSi7Mg 0,3 according to EN AC 42100 and others under the order, as well as preparatory alloys (PS). The company quality system was certified in accordance with DIN EN ISO 9001:2009 (UkrSERPO).

- Primary foundry alloys

Primary foundry alloys are widely used for different parts used in automobile and other engineering industries. Primary foundry alloys are produced in the form of small ingots (6-8 kg), small ingots (15 kg), or a T-shaped ingot.

Cast alloys of primary aluminum are the following systems and standards:

     AlSi (including AlSi3, AK7, AK9ch, AK9pch, AK9E, AK9S, AK12, AK12och, AK12pch, EN AB-AlSi9, EN AB-AlSi11, EN AB-AlSi12(a), EN AB-AlSi12(b), alloys with high silicon);
     AlSiMg (including AlSi7Mg/A356.2, AlSi10Mg, AlSi11Mg);
     AlSiCu (including AK5M2, AK6M2, AK8M, AK10M2N, AK12M2, AK12MMgN).

     GOST 11069-2001
     GOST 1583-93
     International standards and specifications, as agreed with customers.

For more details about the primary cast aluminum alloys, you will learn in the section.

Ukraine, Lugansk region

+380686958849
e-mail: ukrbas@gmail.com

- Steel tubes used (Steel Pipes Used, Rohr) and spiral welded

- Low carbon steel wire normal quality general purpose

- Foundry and Basic Pig Iron PL1, PL2

Merchant pig iron comprises three main types: BASIC PIG IRON, used mainly in electric arc steelmaking, HAEMATITE PIG IRON [also known as FOUNDRY PIG IRON], used in mainly in the manufacture of grey iron castings in cupola furnaces, and NODULAR PIG IRON, used in the manufacture of ductile [also known as nodular or spheroidal graphite - SG] iron castings. Pig iron contains at least 92% Fe.

4.0-4.5% carbon,

<1.5% silicon,

<1.5% manganese,

<0.04% sulphur,

<0.3% phosphorus

- Aluminum scrap UBC

UBC (aluminum used beverage can scrap), Taldon, Talcred, Taldork

Taldon - BALED ALUMINUM USED BEVERAGE CAN (UBC) SCRAP -

Shall have a minimum density of 14 pounds per cubic foot (225 kg/m3), and a maximum density of 17 pounds per cubic foot (273 kg/m3) for un flattened UBC and 22 pounds per cubic foot (353 kg/m3) for flattened UBC.

Size: Minimum 30 cubic feet (.85m3), with bale range dimensions of 24" to 40" (61 to 132 cm) by 30" to 52" (76 to 132 cm) by 40" to 84"(102 to 213 cm).

Talcred - SHREDDED ALUMINUM USED BEVERAGE CAN (UBC) SCRAP

Shall have a density of 12 to 17 pounds per cubic foot (193 to 273 kg/m3). Material should contain maximum 5%fines less than 4mesh (U.S. standard screen size) (6.35mm).

Taldork - BRIQUETUED ALUMINUM USED BEVERAGE CAN (UBC) SCRAP

Shall have a briquette density of 50 pounds per cubic foot (800 kg/m3) minimum. Nominal briquette size shall range from12" to 24" (30.5 x 61 cm) x 12" to 24" (30.5 x 61 cm) in uniform profile with a variable length of 8" (20.3 cm)minimumand 48" (122 cm)maximum.

"Ukrbascompany" specializes in die-casting of aluminum alloys under low and high pressure, casting by consumable patterns of ferrous and non-ferrous alloys.

The range of parts produced for machine-building and instrument-making industry in Ukraine and abroad includes frames, flanges, bearing covers, reducer covers, holders, running gear parts for elevators, escalators, auto-loaders; cases for lamps, telephone sets and switching blocks; bimetallic heating radiators and other. The quality of produced parts is assured by up-to-date production technologies, and also by the abstemious control system as to the technology process, alloys quality (spectrum analysis), geometrical dimensions, mechanical tests. The level of our specialists' technical competence affords to perform complicated specific orders. We invite You to a mutually beneficial cooperation. Casting methods:

Die-casting under low and high pressure of aluminum alloys
In castings manufacture are used aluminum alloys AlSi9Cu3 (46000 DIN EN 1706), AlSi12Cu1 (Fe) (47100 DIN EN 1706) and other.